Programming instructions

Plug-in Modules Wiring Information 119
DIN-TO-D Cables
Three DIN-to-D cables are available for the Agilent N22XX series modules.
The 96-pin female DIN connectors at one end of the cables are used to
connect the plug-in modules, and the other ends are either 50-pin or 25-pin
female sub-D connectors, as listed in Table 6-18.
Agilent N2297A Figure 6-27 shows an Agilent N2297A. The wire gauge is 26 AWG (which
meets UL AWM: 2464), the maximum voltage is 200 volts per wire. The
connection between the 96-pin female DIN connector and the two 50-pin
sub-D male connectors is also listed.
Figure 6-27. Agilent N2297A Cable
Table 6-18. DIN-TO-D Cables
Agilent P/N Description Application
Agilent
N2297A
DIN96-TO-TWIN-D50 CABLE: 1.5-meter round cable
terminated with a 96-pin female DIN connector at one
end, two 50-pin male sub-D connectors at another end
For Agilent
N2260A/61A/62A/63A/64A/65A.
Agilent
N2298A
DIN96-TO-D25 CABLE: 1.5-meter round cable
terminated with a 96-pin female DIN connector at one
end, a 25-pin male sub-D connector at another end.
For Agilent N2262A only.
Agilent
N2299A
DIN96-TO-QUAD-D25 CABLE: 1.5-meter round cable
terminated with a 96-pin female DIN connector at one
end, four 25-pin male sub-D connectors at another end
For Agilent
N2260A/61A/62A/63A/64A/65A.
C
B
A
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
C
B
A
32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
96-pin female DIN connector
(on the DIN-to-D cable)
CONNECTOR 1CONNECTOR 2
17
33
50
17
18
34
33
50
1
CONNECTION
CONNECTOR 1 vs. 96-PIN DIN
PIN
1-16
17
18-33
34
35-50
A1-A16
--
B1-B16
--
C1-C16
CONNECTOR 2 vs. 96-PIN DIN
PIN
1-16
17
18-33
34
35-50
A17-A32
--
B17-B32
--
C17-C32
CONNECTION
Agilent