Programming instructions

110 Plug-in Modules Wiring Information
Appendix A
Plug-in Modules Wiring Information
BNC and SMA Connection
The modules listed in Table 6-16 provide BNC or SMA connections to
external devices.
Screw Terminal Blocks
A set of screw terminal blocks are available for wiring conveniences, as
listed in Table 6-17. Figure 6-20 through Figure 6-23 illuminate wiring for
the three screw terminal block types.
Table 6-16. BNC & SMA Connection
Connection Type Quantity Module Description
BNC Connector
10
Agilent 44472A Dual 4-Channel VHF Switch Module
10
Agilent 44478A 50Ω 1.3 GHz MUX Module
10
Agilent 44478B 75Ω 1.3 GHz MUX Module
10
Agilent N2272A 1GHz RF 1-to-9 MUX Module
SMA Connector
9
Agilent 44476A 3-Channel 18 GHz Switch Module
6
[1]
Agilent 44476B 2-Channel Microwave Switch Module
10
Agilent N2268A 50 3.5GHz Dual 1-to-4 MUX Module
[1]. The number of SMA connectors depends on the specified microwave modules installed. If the two
modules are 5-port, the number of SMA connectors is 10, and so on.
Table 6-17. Screw Terminal Blocks
Screw Terminal Block
(Wiring Inf.)
Agilent P/N Application
Type A
[1]
(Figure 6-20 on Page 112
& Figure 6-21 on Page 113)
Agilent 44480A
For Agilent 44470A module only (default).
Agilent 44481A
For Agilent 44471A module only (default).
Agilent 44483A
For Agilent 44473A module only (default).
Agilent 44484A
For Agilent 44474A module only (default).
Agilent 44485A
For Agilent 44475A module only (default).
Agilent 44487A
For Agilent 44477A module only (default).
Type B
(Figure 6-22 on Page 114)
Agilent 44480B
For Agilent 44470D module only (default).
Agilent 44481B
For Agilent 44471D module only (default).