User`s guide

30
Screw terminal block
Ordering instructions continued
RF and microwave modules
34941A Quad1x450-ohm3-GHzRFmultiplexer 20–SMA Requiresstandard50ohmSMARFcables,andoptional
    8710-2576SMAExtenderwrenchforconnectingSMA
connectors
34942A Quad1x475-ohm1.5GHzRFmultiplexer 20–MiniSMB Requiresmini75ohmSMBRFcables,adapters
34945A Microwaveswitch/attenuatordriver N/A Requires34945EXTandoptionalY1150A-Y1155A
distribution boards (one 34945EXT is automatically included
in each 34945A order)
34946A Dual1x2SPDTterminatedmicrowaveswitch 6SMA Requiresstandard50ohmSMAcablesandadapters
Option 001: Noswitchesinstalled   8710-2576SMAExtenderforconnectingSMAconnectors
Option 004: 4GHZswitchesinstalled   Option001supportsqty2ofanyofthe
Option 020: 20 GHz switches installed following switches:
Option 026: 26.5GHzswitchesinstalled   N1810ULunterminatedSPDT
    N1810TLterminatedSPDT
 N1811TLterminated4porttransfer
 N1812ULunterminated5porttransfer
34947A Triple 1x2 wwunterminatedmicrowaveswitch 9SMA Requiresstandard50ohmSMAcablesandadapters
Option 001: Noswitchesinstalled   8710-2576SMAExtenderforconnectingSMAconnectors
Option 004: 4GHZswitchesinstalled   Option001supportsqty3N1810ULunterminated
Option 020: 20 GHz switches installed SPDT switches
Option 026: 26.5 GHz switches installed
System measurement and control modules
34950A 64-bitdigitalI/Owithmemoryandcounter 2–78-pinDsub,Female 3495xTTerminalblockwithscrewconnectors
    Y1137A–1.5m78-pinM/FDsubcable
    Y1138A–3m78-pinM/FDsubcable
    Y1142A–78-pinmalesoldercupconnectorkit
34951A 4-channelisolatedD/Aconverterwithwaveform 1–50-pinDsub,Female 3495xTTerminalblockwithscrewconnectors
memory (DMM option required for calibration)
   Y1135A–1.5m50-pinM/FDsubcable
    Y1136A–3m50-pinM/FDsubcable
    Y1141A–50-pinmalesoldercupconnectorkit
34952A Multifunction module with 32-bit DIO, 2-ch D/A
and totalizer
34959A Breadboardmodule 26-&40-pininternal Anyterminalblockcanbeusedassuming
  ribboncableconnectors 50-or78-pinDsubisused
Accessories
Y1130A Rackmountkitfor34980A,forwardorreversemount(mustordereitherE3663AC
rail kit for forward rack mounting or E3664AC rail kit for reverse rack mounting)
Y1131A Verification and diagnostic tools for 34980A mainframe and modules
(select option for specific module support)
Y1132A Module extender for 34980A. Extends cable to locate module outside of mainframe
8710-2576 SMAExtenderforconnectingSMAconnectors.
Terminal blocks used for discrete wiring. Supports 20 AWG wire for
<100connectionsand24AWGfor>100connections.
3492xT Multiplexer terminal blocks
3493xT Matrix and GP terminal blocks
3495xT Measurement and control terminal blocks
Cables
[1]
used for direct cable connection to module. some modules require 2 cables
Y1134A Rowexpansioncablesfor34934Cand34934T
Y1135A 1.5m50-pinDsub,M/Ftwistedpairwithoutershieldcable–300V
Y1136A 3m50-pinDsub,M/Ftwistedpairwithoutershieldcable–300V
Y1137A 1.5m78-pinDsub,M/Ftwistedpairwithoutershieldcable–300V
Y1138A 3m78-pinDsub,M/Ftwistedpairwithoutershieldcable–300V
Rackkit