User`s guide

57
Chapter 2 Front-Panel Overview
To Store the Instrument State
4
2
To Store the Instrument State
You can store the instrument state in one of five non-volatile storage
locations. A sixth storage location automatically holds the power-down
configuration of the instrument. When power is restored, the instrument
can automatically return to its state before power-down (a scan in
progress before power-down will also be resumed).
1 Select the storage location.
From the front panel, you have the ability to assign names (up to 12
characters) to each of the five stored states.
The storage locations are numbered 1 through 5. The power-down state
is automatically stored and can be recalled from the front panel (the
state is named LAST PWR DOWN).
2 Store the instrument state.
The instrument stores all channel configurations, alarm values, scaling
values, scan interval setups, and advanced measurement configurations.
NAME STATE
1: TEST_RACK_2
STORE STATE
2: STATE2
CHANGE SAVED
34970A Refresh UG.book Page 57 Wednesday, February 17, 2010 12:34 PM