User`s guide

Chapter 2 Front-Panel Overview

To Configure the Remote Interface - 34972A

1 Select the USB interface.

2 Enable or disable the USB interface.

Select either USB ENABLED or USB DISABLED.

3 View the USB ID String

The instrument will display its USB identification (USB ID) string. This

is helpful in identifying the device on the USB network. Use the left and

right arrows above the knob to view the full string.

4 Save the changes and exit the menu.

USB Configuration

USB INTERFACE

USB ENABLED

USB0::2391::8199::MY01023529::0::INSTR

34970A Refresh UG.book Page 56 Wednesday, February 17, 2010 12:34 PM