User`s guide

Chapter 2 Front-Panel Overview

To Configure the Remote Interface - 34970A

1 Select the RS-232 interface.

2 Select the baud rate.

Select one of the following: 1200, 2400, 4800, 9600, 19200, 38400,

57600 (factory setting), or 115200 baud.

3 Select the parity and number of data bits.

Select one of the following: None (8 data bits, factory setting), Even

(7 data bits), or Odd (7 data bits). When you set the parity, you are also

indirectly setting the number of data bits.

4 Select the flow control method.

Select one of the following: None (no flow control), RTS/CTS, DTR/DSR,

XON/XOFF (factory setting), or Modem.

5 Save the changes and exit the menu.

RS-232 Configuration

RS-232

19200 BAUD

EVEN, 7 BITS

FLOW DTR/DSR

34970A Refresh UG.book Page 54 Wednesday, February 17, 2010 12:34 PM