User`s guide

Chapter 2 Front-Panel Overview

Front-Panel Menu Reference

Store and recall instrument states.

• Store up to five instrument states in non-volatile memory.

• Assign a name to each storage location.

• Recall stored states, power-down state, factory reset state, or preset state.

Configure the remote interface (34970A).

• Select the GPIB address.

• Configure the RS-232 interface (baud rate, parity, and flow control).

Configure the remote interface (34972A).

• Configure the LAN settings (IP Address, Hostname, DHCP, etc.)

• Configure the USB settings (Enable, USB ID, etc.)

• Configure and use the USB drive (Logging, etc.)

34970A Refresh UG.book Page 43 Wednesday, February 17, 2010 12:34 PM