User`s guide

24
Chapter 1 Quick Start
To Prepare the Instrument for Use
4 Perform a complete self-test.
The complete self-test performs a more extensive set of tests than those
performed at power-on. Hold down as you turn on the instrument
and hold down the key until you hear a long beep. The self-test will begin
when you release the key following the beep.
If the self-test fails, see the 34970A/34972A Service Guide for instructions
on returning the instrument to Agilent for service.
34970A Refresh UG.book Page 24 Wednesday, February 17, 2010 12:34 PM