User`s guide

233
Chapter 5 Error Messages
Instrument Errors
4
5
470 Measurement was reconfigured; Cannot save configuration data
Measurement configuration no longer agrees with the corresponding set
of readings. Configuration data will not be saved to the USB drive.
471 USB operation aborted; Cannot save configuration data
An abort or device clear was received while fetching configuration data
from secondary processor. Configuration data will not be saved to the
USB drive.
472 One or more blcfg file names invalid; files inaccessible
Agilent BenchLink Data Logger BLCFG configuration files on the USB
drive are limited to 40 character filenames (including the .blcfg
extension), and all characters must be ANSI. Only legal filenames will be
selectable for import.
473 Disk contains too many blcfg files; oldest files inaccessible
Instrument will only catalog the 50 most recently created Agilent
BenchLink Data Logger BLCFG files. Older files will not be selectable
for import.
34970A Refresh UG.book Page 233 Wednesday, February 17, 2010 12:34 PM