User`s guide

158
Chapter 4 Features and Functions
Digital Output Operations
• Remote Interface Operation: From the remote interface, you can
output an 8-bit byte to one port or a 16-bit word to both ports
simultaneously using the following commands. You must specify a
decimal value (binary data is not accepted). If you are going to read
both ports simultaneously, you must send the command to port 01.
SOUR:DIG:DATA:BYTE 10 ,(@302) Write to port 02
SOUR:DIG:DATA:WORD 10327 ,(@301)
Write to both ports
34970A Refresh UG.book Page 158 Wednesday, February 17, 2010 12:34 PM