- Agilent Data Acquisition Switch Unit Quick Reference Guide

Current Configuration Commands
(see page 224 in the User’s Guide)
Valid only on channels 21 and 22 on the 34901A multiplexer module.
CONFigure
:CURRent:DC [{<
range>|AUTO|MIN|MAX|DEF}
[,<
resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
CURRent:DC:RANGe {<
range>|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:RANGe? [{(
@<ch_list>)|MIN|MAX}]
CURRent:DC:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
CURRent:DC:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
CURRent:DC:RESolution {<
resolution>|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:RESolution? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
CURRent:DC:APERture {<
time>|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:APERture? [{(
@<ch_list>)|MIN|MAX}]
[SENSe:]
CURRent:DC:NPLC {0.02|0.2|
1|2|10|20|100|200|MIN|MAX}[,(@<ch_list>)]
CURRent:DC:NPLC? [{(
@<ch_list>)|MIN|MAX}]
CONFigure
:CURRent:AC [{<
range>|AUTO|MIN|MAX|DEF}
[,<
resolution>|MIN|MAX|DEF}],] (@<scan_list>)
CONFigure? [(
@<ch_list>)]
[SENSe:]
CURRent:AC:RANGe {<
range>|MIN|MAX}[,(@<ch_list>)]
CURRent:AC:RANGe? [{(
@<ch_list>)|MIN|MAX}]
CURRent:AC:RANGe:AUTO {OFF|
ON}[,(@<ch_list>)]
CURRent:AC:RANGe:AUTO? [(
@<ch_list>)]
[SENSe:]
CURRent:AC:BANDwidth {3|
20|200|MIN|MAX}[,(@<ch_list>)]
CURRent:AC:BANDwidth? [{(
@<ch_list>)|MIN|MAX}]
This command redefines the scan list when executed.
Default parameters are shown in bold.
8