Specifications

36 Agilent 34980A Mainframe User’s Guide
2 Getting Started
Configure Key Group
Use these menus to set
measurement parameters.
The DMM Menu
•
Set the internal DMM’s measurement function (AC volts, DC volts, AC current, DC current,
2-wire ohms, 4-wire ohms, temperature, frequency, and period)
• Set measurement function parameters
The Channel Menu
•
Set channel measurement function (AC volts, DC volts, AC current (34921A only), DC
current (34921A only) 2-wire ohms, 4-wire ohms, temperature, frequency, and period)
• Set measurement function parameters
The Scan Menu
•
Set trigger-in parameters
• Set sweep count
• Set sample count
The Sequence Menu
•
View a sequence command string
• Execute the sequence
• Delete sequence definitions
The Module Menu
•
Open all relays
• Clear all measurement functions
• Clear channel labels
• Configure external trigger and clock (applies only to 34951A module)
• Set trace or level mode (applies only to 34951A module)
• Set waveform parameters (applies only to 34951A module)
The View Menu
•
View errors and alarms
• Read the number of cycles for the displayed relay (relay maintenance feature)
The Advanced Key
This key is reserved to operate advanced functions in a future firmware release. When
activated, you will be notified in the release notes accompanying the enabling firmware
revision.
The Alarm Menu
•
Select one of four alarms to report alarm conditions on the displayed channel
• Configure a high limit, a low limit, or both for the displayed channel
• Select the slope (rising or falling edge) for the four alarm output lines
The Exit Menu Key
Press to leave the current menu, saving all changes made in that menu
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com