Specifications

Getting Started 2
Agilent 34980A Mainframe User’s Guide 31
Installing a Terminal Block
After making external wiring connections to a terminal block, follow the
procedure below to fasten the block to a plug- in module.
1 Push the levers on the terminal block to the fully- open position as
shown below. Then slide the terminal block into the
instrument- mounted support sleeve...
…until the terminal block stops at the two points indicated by the
arrows below.
2 Carefully rotate the levers upward as shown…
…until both levers are locked in the closed position.
Terminal Block
Support Sleeve
34980A Mainframe
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com