Specifications

30 Agilent 34980A Mainframe User’s Guide
2 Getting Started
3
Make connections to the individual terminals as appropriate. Use a
suitable wire type, gauge and insulation for your application (typical is
20 AWG; the terminals can accommodate a maximum of 18 AWG). Use
a 2.5 mm cable tie as shown for additional strain relief.
4 To replace the terminal block cover, slide the cover tabs into the tab
holders on the terminal block as shown. Press down on the cover until
it snaps securely into place. Continue with the next section to install
the terminal block to the module.
Wire Size: 20 AWG (typical); 18 AWG (max)
6 mm
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com