User`s manual

110
Chapter 5 Remote Interface Reference
3488 Mode Commands
5
The slot parameter is a decimal ranging from 0 to 9 (mainframe
dependent). Valid slot numbers are:
The port parameter is a number that indicates where the data is to be
read. The port is module dependent and the valid port numbers are shown
below.
The number of times to read is an integer between 1 and 32767. If more
than one reading is requested, the 3499A/B/C must be in the OLAP1
mode (see page 123).
3499A slots 0 through 5
3499B slots 0 through 2
3499C slots 0 through 9
Model Number 4-Bit Port 8-Bit Port 16-Bit Port 32-Bit Port
4-Bit Built-in DIO 090 N/A N/A N/A
44474A 16-Bit DIO N/A s00, s01 s02 N/A
N2263A 32-Bit DIO N/A s00, s01, s02, s03 s04, s05 s06
N2264A Multifunction N/A s30, s31 s32 N/A
N2265A Multifunction N/A s40, s41 s42 N/A