User`s manual

103
Chapter 5 Remote Interface Reference
3488 Mode Command Quick Reference
4
5
Command Summary
MASK
Query/set the SRQ mask conditions. 122
OLAP
Enable/Disable GPIB I/O overlap mode. 123
OPEN
Open one or more relays (channels/bits) on the plug-in modules. 124
RECALL
Re-assert the channel/bit setup stored by the command STORE (1-10). 125
RESET
Reset the instrument to its power on state. All channels/bits of the plug-in
modules are open, etc.
125
SLIST
Specify a sequence of channels/bits to be scanned. 126
SYSMODE
Specify a system mode (SCPI or 3488A) for the instrument. 127
SYSMODE?
Query the instrument’s system mode. 127
SREAD
Read back the read-only port on a 44475A Breadboard module
(for 44475A only).
128
SWRITE
Write data to the static write-only port on a 44475A Breadboard module
(for 44475A only).
129
STATUS
Query the Status Byte of the 3499A/B/C. 130
STEP
Sequence through a scan list set up by SLIST. 131
STORE
Store the current of the instrument in the specified register number (1-10). 131
TEST
Cause the 3499A/B/C to perform an internal self-test. 132
VIEW
Query the state of a particular channel/bit. 133
Command Description Page