User`s manual

102
Chapter 5 Remote Interface Reference
3488 Mode Command Quick Reference
5
Command Summary
3488 Mode Command Quick Reference
Command Description Page
CHAN
Open the last channel/bit closed and close the specified channel/bit. 104
CLOSE
Close one or more relays (channels/bits) on the plug-in modules. 105
CMON
Monitor the open/close states of a plug-in module in the specified slot. 106
CRESET
Reset one or multiple cards in the specified slot(s) to their default states. 106
CPAIR
Pair up two plug-in modules of the same type. 107
CTYPE
Query the module’s identification in the specific slot. 108
DBR
Read digital I/O port. 110
DBW
Output a block of binary data to the specified digital I/O port. 112
DELAY
Insert a delay time during scanning. 113
DISP
Write a message to display. 114
DMODE
Establish the handshake mode, polarity and trigger configuration of the
DIO module.
115
DOFF
Turn off the front panel display of the instrument. 117
DON
Turn on the front panel display of the instrument. 117
DREAD
Read the status of a digital I/O port as inputs. 118
DWRITE
Output a block of data to the specified digital I/O port. 120
EHALT
Enable/Disable the stop-on-error mode. 121
ERROR
Query Error register. 121
ID?
Query the instrument’s identity. 121
LOCK
Activate or deactivate locking out the keyboard of the instrument. 122