Specifications

15
Specification
12-channel GP Relay
General Specifications
Relays: Armature non-latching relay
Thermal Offset: <3µV
Relay Life Mechanical: 10
8
Electrical: 5x10
5
( at 1A load)
Maximum Scan Rate: 80 ch/ sec
Input Characteristics
Maximum Voltage: 200V
Maximum Current:
Per channel 1A
Maximum Power:
Per channel 60W or 62.5VA
Initial Closed Channel Resistance: <0.5 Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10
10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10
10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channel <10pF
Channel-Chassis <20pF
Insertion Loss ( with 50 Ω termination):
100kHz <0.10dB
1MHz <0.20dB
10MHz <0.50dB
Crosstalk ( with 50 Ω termination):
100kHz <-70dB
1MHz <-50dB
10MHz <-30dB
Note: All voltage and current are in DC or AC RMS if not specified
3-channel High Current Relay
General Specifications
Relays: Armature non-latching relay
Relay Life Mechanical: 5x10
7
Electrical: 10
5
( at 5A load)
Thermal Offset: <3µV
Time to close one channel: 16ms
Input Characteristics
Maximum Voltage: 125V DC or 200 V AC
Maximum Current: 5A (per channel)
Maximum Power: 150W or 1250 VA (per channel)
Initial Closed Channel Resistance: <0.1 Ω
DC Isolation
Open Channel, Channel-Channel:
<(40°C, 50% RH) >10
10
Ω
Channel-Chassis:
<(40°C, 50% RH) >10
10
Ω
AC Isolation
Capacitance (with 1 channel closed):
Open Channel, Channel-Channe <10pF
Channel-Chassis <20pF
Insertion Loss ( with 50 Ohm termination):
100kHz <0.10dB
1MHz <0.20dB
10MHz <0.50dB
Crosstalk ( with 50 Ohm termination):
100kHz <-70dB
1MHz <-50dB
10MHz <-30dB
Note: All voltage and current are in DC or AC RMS if not specified
16-bit Digital I/O
I /O Lines
Maximum Voltage(line-chassis): +42V DC
Maximum sink current(per bit): 0.6A
Output Characteristics:
V
out
(high) ≥ 2.4V @ I≤ 10mA output
V
out
(low) ≤ 0.8V @ I≤ 600mA input
Input Characteristics:
V
in
(high) ≥ 2.0V
V
in
(low) ≤ 0.8V
Handshake Lines
Max. Voltage(line-chassis): +5V
Max. I
out
(low): <25 mA (when shorted to +5V)
Output Characteristics:
V
out
(high) ≥ 2.4V @ I≤ 400µA output
V
out
(low) ≤ 0.5V @ I≤ 1mA input
Input Characteristics:
V
in
(high) ≥ 2.0V
V
in
(low) ≤ 0.8V
Accessories
N2294A Screw Terminal block
N2296A Crimp & insert terminal block
N2297A DIN96-to-Twin-D50 Cable
N2299A DIN96-to-Quad-D25 Cable