Specifications

Chapter 4 4-5
Appendix
DANL Manual Performance Verification
19.Repeat step 12 through step 15 for all frequencies listed in Table 4-4.
20.Record the results of Table 4-4 in the test record table for your model instrument later
in this chapter. Refer to Table 4-7 on page 4-7. If the analyzer is an E4440A stop here.
21.Repeat step 12 through step 15 for all frequencies listed in Table 4-5.
Table 4-4 DANL (PSA E4440A, E4446A, E4448A)
Frequency Normalized DANL
13.3 GHz 36)
14.0 GHz 37)
15.0 GHz 38)
16.0 GHz 39)
17.0 GHz 40)
18.0 GHz 41)
19.9 GHz 42)
20.1 GHz 43)
21.0 GHz 44)
22.4 GHz 45)
22.6 GHz 46)
24.0 GHz 47)
25.0 GHz 48)
26.4 GHz 49)
Table 4-5 DANL (PSA E4446A, E4448A)
Frequency Normalized DANL
27.0 GHz 50)
28.0 GHz 51)
29.0 GHz 52)
30.0 GHz 53)
31.0 GHz 54)
32.0 GHz 55)
33.0 GHz 56)
34.0 GHz 57)
35.5 GHz 58)