User`s guide

44 34450A User’s Guide
2 Functions and Features
The Dual Display
Most measurement functions have predefined range or
measurement capabilities that can be displayed in the dual
measurement mode. All math operations have predefined
operations that are displayed on the dual display.
Table 2- 3 below shows the measurement functions which are
available in dual display mode.
Tab le 2-3 Measurements available in dual display mode
[1][2][3][4][5]
[1] All specifications are ensured only under a single display.
[2] For ACI-ACV dual measurement, the ACV input signal is limited to
500,000 VxHz.
[3] For DCI-ACV dual measurement, the ACV input signal is limited to
6,000,000 V×Hz.
[4] For DCV-ACV dual measurement, the DCV input signal is limited to 500 V when
ACV input signal is in 100 mV range. The ACV input signal must be greater than
50 mV.
[5] For ACI-DCV dual measurement operation frequencies, refer to Table 2-4 on
page 45
Primary Display
Secondary Display
DCV ACV DCI ACI Frequency
DCV -
 
-
ACV

-
 
DCI

- - -
ACI

- -

FREQUENCY -

-

-