Technical data

1 Performance Tests and Calibration
Adjustments
30 34450A Service Guide
Valid gain and frequency compensation input values.
Gain adjustment can be accomplished using the preset calibration points.
DC voltage gain adjustment procedure
Review the “Test Considerations” on page 5 and “Gain adjustment
considerations” on page 29 sections before beginning this procedure.
CAUTION
Never turn off the instrument during a gain adjustment. This may cause calibration
memory for the present function to be lost.
Table 1-10 Valid gain and frequency compensation input values
Function Range Valid Amplitude Input Values
DC voltage 1 V
100 mV, 10 V, 100 V, 1000 V
(0, ±0.2, ± 0.4, ± 0.6, ± 0.8, ± 1, ± 1.2) x Full Scale
± 1 x Full Scale
DC current 100 µA
1 mA, 10 mA, 100 mA, 1 A, 10 A
(0, ±0.2, ± 0.7, ± 1) x Full Scale
(±0.2, ± 0.7, ± 1) x Full Scale
2-W/4-W Resistance 100 Ω,
1 kΩ, 10 kΩ, 100 kΩ, 1MΩ, 10 MΩ
100 MΩ
(0, 0.2, 0.7, 1) x Full Scale
(0.2, 0.7, 1) x Full Scale
100 MΩ and open
AC voltage 100 mV, 1 V, 10 V, 100 V,
750 V
(0.1, 0.7, 1) x Full Scale, 1 kHz,
1 x Full Scale, 1 kHz, 10 kHz
(75 V, 200 V, 750 V), 1 kHz,
200 V, 1 kHz, 10 kHz
AC current 10 mA, 100 mA, 1 A, 10 A (0.1, 0.7, 1) x Full Scale, 1 kHz
Capacitance 1 nF
10 nF, 100 nF, 1 µF, 10 µF, 100 µF, 1 mF, 10 mF
(0.4, 1) x Full Scale and Open
(0.1, 1) x Full Scale
Frequency 1 V, 1 kHz 1 Vrms, 1 kHz