Specifications

The Front-Panel Menu at a Glance
The menu is organized in a top-down tree structure with three levels.
A: MEASurement MENU
1: DIG FILTER 2: INTEGRATE 3: OCOMP Ω 4: LOW POWER Ω 5: LOW VOLT Ω 6: LoV LIMIT Ω
B: TEMPerature MENU
1: PROBE TYPE 2: UNITS 3: RTD TYPE 4:RTD Ro 5: T/C TYPE 6: COLD JUNCT 7: JUNCT TEMP
C: MATH MENU
1: STATS 2: NULL VALUE 3: SCALE GAIN 4: SCALE OFST
D: TRIGger MENU
1: READ HOLD 2: TRIG DELAY 3: N SAMPLES
E: SYStem MENU
1: RDGS STORE 2: SAVED RDGS 3: ERROR 4: TEST 5: CHART OUT 6: CHART SPAN
7: CHART NULL 8: DISPLAY 9: COMMA 10: PRESET 11: REVISION
F: Input/Output MENU
1: HP-IB ADDR 2: INTERFACE 3: BAUD RATE 4: PARITY 5: LANGUAGE
G: CALibration MENU
1: UNSECURED [1: SECURED] [2: CALIBRATE] [3: CHART ZERO] [4: CHART GAIN]
[5: INJECTED I] 6: CAL COUNT 7: MESSAGE
NOTE: The commands enclosed in square brackets ([ ]) in the CAL MENU are "hidden" unless the meter is UNSECURED for calibration.
To turn on menu press:
To move left/right To move up/down
To enter a command press:
3