User`s guide

Examples
The following command configures the instrument for dc voltage
measurements, triggers the meter to take a reading, and then transfers the
reading to the instrument output buffer. The default range (autorange) and
resolution (1 PLC) are used for the measurement.
MEAS:VOLT:DC?
Typical Response: +1.86850000E-03
The following command configures the instrument for dc voltage
measurements, triggers the meter to take a reading, and then transfers the
reading to the instrument output buffer. The 1 V range is selected with 0.1
mV resolution.
MEAS:VOLT:DC? 1,0.0001
Typical Response: +4.27150000E-03