User`s guide

Examples
The following command configures the instrument for 5 kΩ thermistor
measurements, triggers the meter to take a reading, and then transfers the
reading to the instrument output buffer. This 2-wire measurement is made
with 0.1 °C resolution (assumes default temperature units).
MEAS:TEMP? THER,5000,1,0.1
Typical Response: +2.47150000E+01
The following command configures the meter for a 2-wire RTD
measurement, triggers the meter, and then transfers the reading to the
instrument output buffer. The default range and resolution are used for the
measurement.
MEAS:TEMP? RTD,85
Typical Response: +2.12320000E+01