User`s guide

Examples
The following command configures the instrument for 4-wire measurements,
triggers the meter to take a reading, and then transfers the reading to the
instrument output buffer. The default range (autorange) and resolution (1
PLC) are used for the measurement.
MEAS:FRES?
Typical Response: +1.32130000E+03
The following command configures the instrument for 4-wire resistance
measurements, triggers the meter to take a reading, and then transfers the
reading to the instrument output buffer. The 1 kΩ range is selected with 0.1
Ω resolution.
MEAS:FRES? 1000,0.1
Typical Response: +4.27150000E+02