User`s guide

Examples
The following command configures the instrument for dc current
measurements, triggers the meter to take a reading, and then transfers the
reading to the instrument output buffer. The default range (autorange) and
resolution (1 PLC) are used for the measurement.
MEAS:CURR:DC?
Typical Response: +8.54530000E-03
The following command configures the instrument for dc current
measurements, triggers the meter to take a reading, and then transfers the
reading to the instrument output buffer. The 1 A range is selected with 1 mA
resolution.
MEAS:CURR:DC? 1,0.001
Typical Response: +4.27150000E-02