User`s guide

"CURR:DC"
CURRent:AC:PTPeak
FUNC
"CURR:AC"
CURR:AC:PEAK:STAT
ON
VOLTage:AC
FUNC
"FREQ" or
FUNC
"PER"
RESistance
FUNC
"TEMP"
TEMP:TRAN:TYPE:THER
or
TEMP:TRAN:TYPE:RTD
FRESistance
FUNC
"TEMP"
TEMP:TRAN:TYPE:FTH
or
TEMP:TRAN:TYPE:FRTD
If the DISPlay:WINDow2:TEXT:FEED command is sent and the setup
requirements are not met, a settings conflict error is generated. (The
requirements must be met before this command is sent.)
The DISPlay:WINDow2:TEXT[:DATA] command overrides any <feed> set
with the DISPlay:WINDow2:TEXT:FEED command. That is, the text string
is displayed, overriding the measurement or math function in the second
display. The DISPlay:WINDow2:TEXT:CLEar command clears the data and
allows the <feed> to reappear.
If any setup requirement is changed, it will reset the <feed> selection to
the null string (""). For example, CALC OFF will reset a <feed> of
CALC:AVER. to "".
The <feed> selection is not saved as part of the instrument state. It is
cleared to "" when power is cycled, after a Factory Reset (*RST command),
or after an Instrument Preset (SYSTem:PRESet command).