User`s guide

Default Settings for the CONFigure Command

With the CONFigure command, you can select the function, range, and

resolution all in one command. All other measurement parameters are set to

their default values as shown below.

Measurement

Parameter:

CONFigure Setting:

AC Filter 20 Hz (medium filter)

Autozero

OFF if resolution setting results in NPLC <

ON if resolution setting results in NPLC ≥

Input Impedance

OFF (fixed at 10 MΩ for all dc voltage

ranges)

Offset Compensation

OFF (for 2-wire and 4-wire resistance

measurements)

Samples per Trigger 1 sample

Sample Source AUTO

Trigger Count 1 trigger

Trigger Delay Automatic delay

Trigger Source Immediate

Trig Slope NEG

Math Functions OFF

Null State OFF