User`s guide

power on. However, it is not
cleared by a *RST or
SYSTem:PRESet command, nor by
a front panel Reset (Shift + 2nd
Disp).
Input/Output
Configuration
Factory Setting
Enable Interfaces:
1
• LAN • Enabled
• GPIB • Enabled
• USB • Enabled
LAN Settings:
2
• DHCP • On
• Auto IP • On
• IP Address • 169.254.4.10
• Subnet Mask • 255.255.0.0
• Default Gateway • 0.0.0.0
• DNS Server • 0.0.0.0