User`s guide

Power-On and Reset State
The following tables show the factory defaults for various instrument settings.
The parameters marked with a bullet (•) are stored in non-volatile memory,
and are not affected by power-on or a system reset. Other parameters are
stored in volatile memory and are reset to the indicated values at power-on or
after a *RST or SYSTem:PRESet command is issued.
The power-on/reset state may be different than that in the tables if
you have enabled the power-on state recall mode. This mode is
entered from the Utility menu. See the Agilent
34410A/11A/L4411A User's Guide for further information.
Measurement
Configuration
Factory Setting
Function DC Volts
Range
Autorange (for all
functions)
Resolution
6½ Digits (0.3 ppm x
Range)*
Integration Time NPLC On, 1 PLC*
Autozero On*
Aperture Off, 1 second*
• Input Impedance
• 10 MΩ (fixed for all dc
voltage ranges)