User`s guide

Self-Test Errors
The 34410A/11A/L4411A self-test (see the *TST? command) performs a series
of tests on the instrument hardware. Any failure of these tests will generate a
SCPI error number -330, with additional test failure information. Refer to the
Agilent 34410A/11A/L4411A Service Guide for more information.
The form of this error message is as follows:
-330,"Self-test failed; <test# - testname>"
Where test# is the number of the test that failed (range 600 - 622) and
testname describes the test. Here is an example of a test failure message:
-330,"Self-test failed; 619 - AC 0.1VAC Zero Test"
The following is the list of test numbers and descriptions:
Test # Test Name:
600 Front Panel Communications
601 Front Panel All On Test
602 A/D Feedback Test
603 Fine A/D Test
604 Fine A/D Linearity
605 A/D & FE Measure Zero
606 Input Amplifier x100 Zero Test
607 Input Amplifier x10 Zero Test