User`s guide

Remarks
The 34410A/11A/L4411A uses LAN port 5024 for SCPI Telnet sessions (but
5025 for SCPI Socket sessions).
Telnet session can typically be stared as follows from a host computer
shell:
telnet <IP_address> <port>
For example:
telnet 169.254.4.10 5024
To exit a Telnet session, press <Ctrl-D>.
The command prompt is stored in non-volatile memory, and does not
change when power has been off, after a Factory Reset (*RST command),
or after an Instrument Preset (SYSTem:PRESet command).