User`s guide

Description
This command disables or enables use of the Dynamic Host Configuration
Protocol (DHCP) for the 34410A/11A/L4411A.
When DHCP is enabled (factory setting), the 34410A/11A/L4411A will try to
obtain an IP address from a DHCP server. If a DHCP server is found, it will
assign a dynamic IP address, Subnet Mask, and Default Gateway to the
instrument.
When DHCP is disabled or unavailable, the 34410A/11A/L4411A will use the
static IP address, Subnet Mask, and Default Gateway during power-on.
If you change the DHCP setting, you must cycle power on the
instrument to activate the new setting.