User`s guide

Remarks
The condition register bits reflect the current condition. If a condition goes
away, the corresponding bit is cleared in the condition register.
The following table lists the bit definitions for the condition register in the
Questionable Data group.
Bit Number
Decimal
Value
Definition
0 Voltage Overload 1
Only reported as event.
Returns "0". Read the
Event Register.
1 Current Overload 2
Only reported as event.
Returns "0".
Read the Event
Register.
2
Sample Timing
Violation
4
Only reported as event.
Returns "0".
Read the Event
Register.
3 Not Used Not Used "0" is returned.
4
Temperature
Overload
16
Only reported as event.
Returns "0".
Read the Event
Register.
5
Frequency
Overload/Underflow
32
Only reported as event.
Returns "0".
Read the Event
Register.
6-7 Not Used Not Used "0" is returned.
8 Calibration Corrupt 256
At least one calibration
constant is corrupt.
Resistance
Only reported as event.
Returns "0".