Manualshelf

User`s guide

ManualsBrandsAgilent Technologies ManualsMultimeter34410A
1451145214531454145514561457145814591460
Remarks
Autozero ONCE issues an immediate zero measurement, and then sets
autozero to OFF.
The autozero mode is set indirectly when you set the resolution and
integration time using the CONfigure or MEASure commands.
The autozero mode is reset to the default (ON) at power up, or after a
Factory Reset (*RST command) or an Instrument Preset (SYSTem:PRESet
command).