Technical data

42 34405A User’s and Service Guide
2 Features and Functions
Recalling a Stored State
To recall an instrument state:
1 Press , the display Store and Recall annunciators will begin
flashing.
2 Press or until only the Recall annunciator is flashing.
3 Press again.
4 Press or until the state number you want to recall is
shown flashing in the secondary display. You can select state 1 through
4 or LASt for the power- down state. To exit without recalling a state,
select ESC.
5 Press to perform the recall (or ESC) operation. When finished,
the secondary display briefly shows donE.
NOTE
To escape the recall operation without recalling a state, select ESC in step 4 above and
press to escape. After escaping, the secondary display briefly shows - - -
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Store
Recall
NOTE
To escape the recall operation without recalling a state, select ESC in step 4 above and
press to escape. After escaping, the secondary display briefly shows - - -
Store
Recall
Store
Recall