Technical data

38 34405A User’s and Service Guide
2 Features and Functions
Reading Error Messages
The following procedure shows you to read error messages from the front
panel. For remote operation, refer to the SYSTem:ERRor? command in the
Agilent 34405A Online Programmer’s Reference online help.
1 To access the Utility Menu, press
2 Press seven times until Error is shown in the primary display.
3 If there are no errors in the error queue, the secondary display shows
nonE.
If there are one or more errors, Error is shown in the primary display
and nn.Err is shown flashing in the secondary display (where nn is the
total number of errors in the error queue). For example, if there are
three errors in the queue, 03.Err will flash in the secondary display.
Errors are numbered and stored in the queue in the order they
occurred.
4 If there are errors in the error queue, press to read the first
error. The error number in the queue is shown in the primary display
and the actual error number is shown in the secondary display.
5 Repeat step 4 for all errors in the error queue
(you can also use to view the previous error).
6 After reading all errors,
press twice to exit the Utility Menu.
7 The error queue is automatically cleared after has been pressed
and the utility menu is exited.
Shift
Utility
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Edit
Store
Recall
Store
Recall
Edit