Technical data

Features and Functions 2
34405A User’s and Service Guide 37
Changing Configurable Settings
The first seven items in the Utility Menu are configurable (Error and
CodE are not configurable).
1 To access the Utility Menu, press .
2 The first Utility Menu selection (tESt) is shown in the primary display.
When stepping through the configurable items, the present setting for
each item is displayed in the secondary display.
3 To change the setting, use the and keys to select the
setting you want.
4 When the correct setting is displayed in the secondary
display, press to save the setting and advance to the next
item.
5 Repeat steps 4 and 5 for all items in the Utility Menu.
6 When you reach the end of the Utility Menu, the primary display shows
utitY and the secondary display briefly shows donE, after which the
multimeter returns to normal operation.
Shift
Utility
Store
Recall
Store
Recall
Store
Recall
Store
Recall
Edit
NOTE
If you set tESt to On, pressing Store/Recall immediately exits the Utility Menu and
executes self-test. If you set tESt to OFF, go on to the next step (step 5).