Technical data

Menu Example 1 The following steps show you how to turn on the menu, move up or down
between levels, move across the choices on each level, and turn off the
menu. In this example, you will unsecure the multimeter for calibration.
1 Turn on the menu.
You enter the menu on the “menus” level. The
MEAS MENU is your
first choice on this level.
A: MEAS MENU
2 Move across to the
CAL MENU choice on this level.
There are six menu group choices available on the “menus” level. Each
choice has a letter prefix for easy identification (
A: , B: , etc.).
F: CAL MENU
3 Move down to the “commands” level within the
CAL MENU.
Either
SECURED or UNSECURED is the first command on this level.
If
SECURED is displayed, you must unsecure the multimeter so that
calibrations can be performed.
1: SECURED
∨
Shift <
On/Off
>
>
> >
>
3
Chapter 3 Menu Tutorial
A Front-Panel Menu Tutorial
53