Specifications

Power Meter Remote Operation

Using Sensor Calibration Tables

Agilent E4418B/E4419B Programming Guide 1-35

Each string parameter returned indicates the name, type and size of a

stored sensor calibration table:

• <string>,<type>,<size>

The <string>, <type> and <size> are all character data. The

<type> is always TABL. The <size> is displayed in bytes.

For example, a sample of the response may look like:

560,8020,“Sensor_1,TABL,220”,”Sensor_2,TABL,340” ....

The power meter is shipped with a set of predefined sensor calibration

tables. The data in these sensor calibration tables is based on statistical

averages for a range of Agilent Technologies Power Sensors (see Chapter

2, “Editing Sensor Calibration Tables” in the User’s Guide). These power

sensors are:

• DEFAULT

• Agilent 8481A

• Agilent 8482A

• Agilent 8483A

• Agilent 8481D

• Agilent 8485A

• Agilent R8486A

• Agilent Q8486A

• Agilent R8486D

• Agilent 8487A

For further information on naming sensor calibration tables see “Naming

Sensor Calibration Tables”, on page 1-36.

1. DEFAULT is a sensor calibration table in which the reference calibration

factor and calibration factors are 100%. This sensor calibration table can be

used during the performance testing of the power meter.

2. The Agilent 8482B and Agilent 8482H power sensors use the same data as

the Agilent 8482A.

prog.book Page 35 Thursday, June 7, 2001 2:55 PM