Specifications

Index-2 Agilent E4418B/E4419B Programming Guide
enabling frequency dependent offset tables 1-45
enabling sensor calibration tables
1-38
error messages
11-26
errors
1-81
event register
1-72
event status enable command
15-10
expressions
3-24
F
fail counter
clearing 9-40, 9-42
fail limits
1-53
failures
9-43
FCO clearing
9-40, 9-42
filter length
1-50, 9-5
filtering
enabling and disabling 9-7
format
6-2
FORMat Subsystem reference
1-105
frequency
9-37
entering into tables 7-22
frequency dependent offset tables
1-40, 7-2
clearing data 7-10, 7-11
enabling and disabling 1-45, 9-17
entering frequency 7-22
entering offsets 7-26
listing 1-43, 7-4, 7-7
naming 1-44, 7-29
selecting 1-45, 7-30, 9-15
frequency dependent offsets
entering into tables 7-26
front panel control
11-28
front panel lockout
11-32, 11-34
G
gain 9-25
gain correction
9-26
enabling and disabling 9-29
general status register
1-72
GP-IB
11-3, 11-33
GPIB
11-3
GP-IB address
1-3
H
HP 437B command summary 1-6
HP 438A command summary
1-9
I
identification command 15-12
idle state
12-3
IEEE commands
15-1
initiate command
12-4
interface selection
1-3
introduction
1-93
L
language 11-27
language selection
1-4
legal information
iii
limit
setting on the analog meter 5-10, 5-12
limit failures
9-43
amount of 9-44
limits
1-53
enabling 9-46
limits (channel)
enabling 9-48
lower 9-46
upper 9-49
limits (windows)
3-8
clearing fail counter 3-9, 3-11
enabling 3-17
fail 3-12
fail count 3-13
lower 3-15
upper 3-19
limits setting
window limits 1-55
linearity correction V8486A/W8486A
9-56
listing sensor calibration tables
1-34
listing the frequency dependent offset tables
1-43
local control
11-28, 11-32
loss
9-32
enabling and disabling 9-35
loss correction
9-33
lower limit
setting on the analog meter 5-10
lower limit fail summary register
10-13
lower test limit
9-46
M
making measurements 2-2–??
prog.book Page 2 Thursday, June 7, 2001 2:55 PM