Specifications

SERVice Subsystem
SERVice:SENSor[1|2]:TYPE?
Agilent E4418B/E4419B Programming Guide 14-7
SERVice:SENSor[1|2]:TYPE?
This query is used to identify the sensor type connected to the power
meter input channel(s). For Agilent 8480 series sensors, either “A”, “B”,
“D”, or “H” is returned. For E-series sensors, the model number stored in
EEPROM is returned
Syntax
Example
Error Message
If a power sensor is not connected, the error -241 “Hardware missing”
occurs.
SERV:SENS2:TYPE? This query returns either, “A”, “B”,
“D”, or “H” if an Agilent 8480
series sensor is connected to
channel B, or the sensor model
number if an Agilent E-series
sensor is connected to channel B.
SERV
1
2
:TYPE
?:SENS
prog.book Page 7 Thursday, June 7, 2001 2:55 PM