Specifications

UNIT Subsystem
UNIT[1|2]:POWer <amplitude_unit>
Agilent E4418B/E4419B Programming Guide 13-5
Query
UNIT[1|2]:POWer?
The query returns the current setting of the measurement units.
Query Example
UNIT2:POW? This command queries which
measurement units are being used
on the lower window. In addition,
for the Agilent E4419B this
command also queries the default
units for any relevant SENSe2
command.
prog.book Page 5 Thursday, June 7, 2001 2:55 PM