Specifications

STATus Subsystem
Device Status Register Sets
10-8 Agilent E4418B/E4419B Programming Guide
Device Status Register Sets
The following registers contain information which give device status
information.The contents of the individual registers of these register sets
may be accessed by appending the commands listed in “Status Register
Set Commands”.
The following command descriptions detail the SCPI register you require
to control but do not detail the Register Set commands.
The one Device Status Register Set is:
STATus:DEVice:
The following bits in these registers are used by the power meter:
Bit
Number
Decimal
Weight
Definition
0-Not used
1 2 Channel A sensor connected
2 4 Channel B sensor connected (Agilent E4419B only)
3 8 Channel A sensor error
4 16 Channel B sensor error (Agilent E4419B only)
5 32 Channel A sensor Front/Rear
6 64 Channel B sensor Front/Rear (Agilent E4419B only)
7-15 - Not used
14 16384 Front Panel key press
15 - Bit 15 always 0
prog.book Page 8 Thursday, June 7, 2001 2:55 PM