Specifications

STATus Subsystem
Status Register Set Commands
Agilent E4418B/E4419B Programming Guide 10-7
:PTRansition <NRf>|<non-decimal numeric>
This command is used to set the Positive Transition Register of the SCPI
Register Set you require to control. The first 15 bits of the input
parameter are written into the Positive Transition Register of the SCPI
Register Set concerned. The last bit (bit 15) is always set to 0.
Refer to “Status Reporting”, on page 1-71 for a general description of the
status register model.
Syntax
Parameters
Query
:PTRansition?
The query returns a 15 bit decimal-weighted number representing the
contents of the Positive Transition Register of the SCPI register set being
queried. The format of the return is <NR1> in the range of 0 to 32767
(2
15
-1).
Type Description Range of Values
NRf The value used to set the
PTR Register.
0 to 2
16
-1
non-decimal numeric
NRf
non-decimal numeric
?
:PTR
space
prog.book Page 7 Thursday, June 7, 2001 2:55 PM