Specifications

STATus Subsystem
Status Register Set Commands
10-6 Agilent E4418B/E4419B Programming Guide
:NTRansition <NRf>|<non-decimal numeric>
This command is used to set the Negative Transition Register of the SCPI
Register Set you require to control. The parameter value, when rounded to
an integer and expressed in base 2 has it’s first 15 bits written into the
Negative Transition Register of the SCPI Register Set concerned. The last
bit (bit 15) is always set to 0.
Refer to “Status Reporting”, on page 1-71 for a general description of the
status register model.
Syntax
Parameters
Query
:NTRansition?
The query returns a 15 bit decimal-weighted number representing the
contents of the Negative Transition Register of the SCPI register set being
queried. The format of the return is <NR1> in the range of 0 to 32767
(2
15
-1).
Type Description Range of Values
NRf The value used to set the
NTR Register.
0 to 2
16
-1
non-decimal numeric
NRf
non-decimal numeric
?
:NTR
space
prog.book Page 6 Thursday, June 7, 2001 2:55 PM