Specifications

SENSe Subsystem
[SENSe[1]]|SENSe2:POWer:AC:RANGe:AUTO <Boolean>
Agilent E4418B/E4419B Programming Guide 9-53
Query Example
Error Message
If this command is set to OFF when there is not an Agilent E-series power
sensor connected, the error, -241, “Hardware missing” occurs.
POW:AC:RANG:AUTO? This command queries whether
auto ranging is on or off.
prog.book Page 53 Thursday, June 7, 2001 2:55 PM