Specifications

SENSe Subsystem
[SENSe[1]]|SENSe2:CORRection:LOSS2 Node
9-32 Agilent E4418B/E4419B Programming Guide
[SENSe[1]]|SENSe2:CORRection:LOSS2 Node
This node is used to provide a simple correction to the measurement for an
external loss.
Loss and gain correction are a coupled system. This means that a loss set
by [SENSe[1]]|SENSe2:CORRection:LOSS2 is represented in
[SENSe[1]]|SENSe2:CORRection:GAIN2? command.
LOSS2 is coupled to GAIN2 by the equation
when the default unit is linear, and
when the default is logarithmic.
The commands associated with this node are:
[SENSe[1]]|SENSe2:CORRection:LOSS2[:INPut][:MAGNitude]
<numeric_value>
[SENSe[1]]|SENSe2:CORRection:LOSS2:STATe <Boolean>
Gain
1
Loss
------- ------=
Loss Gain–=
prog.book Page 32 Thursday, June 7, 2001 2:55 PM