Specifications

SENSe Subsystem
[SENSe[1]]|SENSe2:CORRection:DCYCle|GAIN3:STATe <Boolean>
9-24 Agilent E4418B/E4419B Programming Guide
Query Example
Error Messages
If [SENSe[1]]|SENSe2:CORRection:DCYCle:STATus is set to ON while
[SENSe[1]]|SENSe2:SPEed is set to 200, the error -221, “Settings
Conflict” occurs.
If this command is used when an Agilent E-series power sensor is
connected, the error -310, “System error;Dty Cyc may impair accuracy
with ECP sensor” occurs. If you are using the Agilent E4419B the error
message specifies the channel.
CORR:GAIN3:STAT? This command queries whether
the pulse measurement feature is
on or off.
prog.book Page 24 Thursday, June 7, 2001 2:55 PM