Specifications

SENSe Subsystem
[SENSe[1]]|SENSe2:AVERage:SDETect <Boolean>
Agilent E4418B/E4419B Programming Guide 9-11
Query
[SENSe[1]]|SENSe2:AVERage:SDETect?
The query enters a 1 or 0 into the output buffer indicating the status of
step detection.
• 1 is returned when step detection is enabled.
• 0 is returned when step detection is disabled.
Query Example
SENS:AVER:SDET? This command queries whether
step detection is on or off.
prog.book Page 11 Thursday, June 7, 2001 2:55 PM